Description

About LaHabra 25 lb. Fog Coat Stucco Coating – X-86 Sandstone

When you need to bring back the natural tone of stucco or correct jobsite color mismatches, LaHabra’s Fog Coat in X-86 Sandstone gets it done with simplicity. This dry mix blends with water to create a sprayable Portland cement coating. Once applied, it bonds directly with the stucco surface, so there’s no peeling like you’d see with regular paint.

It’s made to perform well in various climates and job conditions, helping to mask fading and even out the wall color with a finish that holds up for years. The Sandstone shade offers a neutral, natural hue that complements a wide range of architectural styles, from Southwestern to coastal.

This product is pigment-integrated, meaning the color is built into the cement-based formula. The result is a finish that doesn’t flake and won’t require frequent reapplication.

Ideal for recoloring faded stucco or blending patched areas, this fog coat skips the typical prep required with paint and gives long-term visual consistency.

LaHabra Fog Coat Stucco Coating – X-86 Sandstone Specifications

• Weight per bag: 25 lb
• Coverage area: 800–1,000 sq. ft. per bag
• Product color: X-86 Sandstone
• Application method: Spray only
• Base material: Portland cement blend with built-in color pigment
• Curing time: Full curing takes several days
• Recommended coats: 2 light applications
• Mixing ratio: Mix with 10 gallons of water (staged mixing)

Additional Features of LaHabra Fog Coat Stucco Coating – X-86 Sandstone

• Non-peeling finish, unlike traditional paints
• No primer needed if used over unsealed, unpainted stucco
• Matches any of LaHabra’s 52 color standards
• Allows for easy touch-ups or full recoats
• Won’t damage breathable stucco surfaces
• Requires minimal surface prep on bare stucco
• Ideal for minor stucco color corrections
• Can be sprayed with standard hand pump or tank sprayer
• More cost-effective than repainting
• Helps hide discoloration or patching work

LaHabra’s Fog Coat products are backed by the manufacturer’s standard limited product warranty, covering defects in materials when used according to instructions. This product is for professional and residential use and is not returnable as it is made to order. Be sure to store and mix as directed to maintain product integrity.

LaHabra Fog Coat in X-86 Sandstone is a special order item and is not kept in regular store inventory. Orders are processed directly through distribution partners. Shipping typically requires additional lead time due to custom tinting and bag preparation.

• Available for shipment only (no in-store pickup)
• Delivery lead time: 7–10 business days
• Not eligible for express shipping
• Ships in dry powder form—mix on site with clean water
• Non-returnable unless defective

Can I apply this over painted stucco?

No. LaHabra Fog Coat must be applied to bare, unpainted stucco surfaces. It will not bond correctly to paint or sealers.

What type of sprayer do I need for application?

You can use a hand pump sprayer, compressed tank sprayer, or a modified painter’s airless sprayer. Just make sure to strain the mixture before loading to avoid clogs.

How long before the wall is fully cured?

Initial drying happens fairly quickly, but full curing can take several days. Moistening the surface 24 hours after application helps the process.

What happens if it oversprays onto painted trim?

Remove any overspray immediately using water or mild soap. Once dry, it may cause etching or leave a permanent mark on some surfaces.

Can I apply a second color coat over the first later?

Yes. Once the first application is cured, you can reapply the same or a different LaHabra Fog Coat color if needed.