Description

About LaHabra 25 lb. Fog Coat Stucco Coating – X-82 Hacienda

This coating isn’t just about color—it’s about restoring uniformity across aged or mismatched stucco. LaHabra Fog Coat X-82 Hacienda offers a grounded tan shade that blends well with stone, brick, or clay tile roofs. The color is subtle but rich, ideal for homes that need a refresh without a major overhaul.

Instead of sitting on top like paint, this fog coat becomes part of the surface. It’s cement-based, so once applied, it bonds with the existing stucco and holds up without peeling or cracking. That means the original texture of the wall stays intact—just with a fresh, consistent tone.

X-82 Hacienda works well across a wide range of home styles—from Mediterranean to Southwest. If your current stucco has faded, been patched, or shows variation from previous repairs, this product helps unify it all.

LaHabra Fog Coat Stucco Coating – X-82 Hacienda Specifications

• Color Code: X-82 Hacienda
• Product Type: Portland cement-based fog coat
• Bag Weight: 25 lbs.
• Coverage:
  

• 800–1,000 sq. ft. per bag
• 74–93 m² depending on surface texture

• Finish: Flat, natural appearance
• Application Tools:
  

• Hand pump sprayer
• Compressed air sprayer
• Modified airless sprayer

• Mixing Instructions:
  

• Mix with 5 gallons of water
• Stir, add another 5 gallons
• Rest 10–15 mins, then strain

• Surface Requirement: Clean, bare stucco only (no paint or sealants)
• Coats Required: 2 for best coverage
• Curing Process: Mist lightly with water after 24 hours

Additional Features of LaHabra Fog Coat Stucco Coating – X-82 Hacienda

• Warm tan tone suited for earthy exterior palettes
• Allows water vapor to escape through stucco—no surface sealing
• Cement-based formulation won’t peel like typical paint
• Covers patchy or inconsistent color zones
• Designed for large-area coverage or touch-up blending
• No additional colorants or primers needed
• Neutral shade works with wood, metal, or stone trims
• Uniform finish without changing texture of walls

LaHabra provides a limited warranty when the product is applied under proper conditions. Surfaces must be unpainted and unsealed stucco. Proper mixing, straining, and spraying techniques are also essential. Always follow the application guide for warranty coverage to remain valid.

LaHabra Fog Coat X-82 Hacienda is not kept in standard store inventory and must be special ordered. Each 25 lb. bag covers between 800–1,000 sq. ft. based on the surface profile. For full color consistency, order all needed bags in one shipment.

Can I use this product to cover hairline cracks in stucco?

No, Fog Coat is not a crack filler. It’s a color coating and will not seal structural imperfections. Address cracks before applying.

Is this product suitable for newer stucco homes?

Yes, once the stucco has cured and is clean and unpainted, it can be fog coated for an even tone or to correct batch color variations.

Will I need a primer or sealer with this?

No primer or sealer is needed. This is a standalone product designed to bond with bare stucco.

Can I roll or brush this product on?

No, this product must be sprayed. Applying with rollers or brushes leads to poor finish and may cause flaking.

How does it hold up in areas with a lot of sun?

Very well. The color is integrated into the cement mix, so it resists UV fading better than surface paint.