Glaze N Seal Wet Look Paver Sealer
$82.50
Lock in the beauty and durability of your interlocking pavers with Glaze N Seal Wet Look Paver Sealer. This high-gloss formula offers stain resistance and stabilizes joint sand for long-lasting results.
- Description
- Additional information
- Downloads
- Warranty Information
- Frequently Asked Questions
Description
Lock in the beauty and durability of your interlocking pavers with Glaze N Seal Wet Look Paver Sealer. This high-gloss formula offers stain resistance and stabilizes joint sand for long-lasting results.
About Glaze N Seal Wet Look Paver Sealer
Glaze N Seal Wet Look Paver Sealer is an advanced sealing solution designed to protect and enhance the appearance of interlocking concrete pavers. Its high-gloss “wet look” finish deepens the color of pavers while providing a strong barrier against stains, grease, and oil. The formula also resists fading, efflorescence, weeds, and mildew, keeping surfaces looking fresh and vibrant.
By locking joint sand into place, this sealer stabilizes paver installations and prevents shifting or loss of sand over time. Designed for both residential and commercial applications, it’s perfect for driveways, patios, walkways, and pool areas. The easy-to-apply formula dries quickly, allowing you to finish your project efficiently.
Product Specifications
- Coverage:
- First coat: 100–250 sq. ft. per gallon (depending on surface porosity)
- Second coat: Covers up to 50% more area
- Application Tools: Solvent-resistant sprayer, natural bristle brush, or non-foam squeegee
- Drying Time: Optional second coat can be applied after 2 hours
- Base Type: Solvent-based formula
- Key Features:
- High-gloss “wet look” finish
- Locks joint sand into place
- Resists stains, grease, oil, and fading
- Helps prevent weeds, mildew, and efflorescence
Additional Features
- One-Step Solution: Seals pavers and stabilizes sand in a single application.
- Weather Resistance: Protects against harsh conditions, including UV exposure and rain.
- Optional Grip Additive: For slip resistance, mix with Glaze N Seal Grip ‘N Seal additive.
- Multi-Surface Use: Suitable for driveways, patios, pool decks, and walkways.
- Improved Longevity: Extends the life of your pavers while reducing maintenance.
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 8 × 8 × 10 in |
| Unit: | 1 GAL |
A limited manufacturer warranty is included with Glaze N Seal Wet Look Paver Sealer when applied as directed. It’s recommended to test the product on a small, inconspicuous area prior to full application to confirm compatibility and performance.
Q1: Can this sealer be used on surfaces other than concrete pavers?
A1: Yes, it’s also suitable for stamped concrete, brick, and other porous masonry surfaces. Always test on a small area first.
Q2: How many coats are recommended for best results?
A2: One coat is sufficient for most applications, but a second coat can be applied after 2 hours for increased protection and gloss.
Q3: Is this sealer slippery when wet?
A3: While it provides a glossy finish, adding Glaze ‘N Seal Grip ‘N Seal slip resistance additive to the second coat can help reduce slipperiness.
Q4: How should I prepare the surface before applying the sealer?
A4: Make sure the surface is clean, dry, and free of dirt, grease, and efflorescence. Sweep the area thoroughly and remove any loose sand from the joints.
Q5: Can this product be applied in cold or damp conditions?
A5: For best results, apply in dry conditions with temperatures between 50–90°F. Allow extra drying time in cooler or more humid climates.
