Description

Achieve a stunning “Wet Look” with Glaze N Seal Wet Look II Sealer. This water-based, non-yellowing formula provides exceptional protection and beauty for indoor and outdoor surfaces.

About Glaze N Seal Wet Look II Sealer

Glaze N Seal Wet Look II Sealer brings out a deep, high-gloss finish on concrete, masonry, stone, tile, and grout. Engineered to mimic the effect of solvent-based sealers, this water-based formula offers a safer, eco-friendly alternative without compromising durability. Its advanced chemistry repels oil, grease, water-based stains, and acids, while resisting UV damage, efflorescence, and abrasion.

Designed for a variety of applications, Wet Look II Sealer is perfect for stamped concrete, slate, exposed aggregate, and brick, making it an excellent choice for patios, driveways, and walkways. Quick drying and easy to apply, the product simplifies the sealing process while delivering long-lasting results.

Glaze N Seal Wet Look II Sealer

• Coverage: 150–600 sq. ft. per gallon (varies by surface porosity)
• Application: Suitable for indoor and outdoor use
• Drying Time: Dries clear within 15–20 minutes per coat
• Base Type: Water-based formula
• Key Features:
  • High-gloss “Wet Look” finish
  • Non-yellowing and VOC compliant
  • Repels oil, grease, water, and acids
  • UV and abrasion-resistant
  • Faster drying for efficient application

Additional Features

• Versatile Usage: Designed for use on concrete, stone, unglazed tile, brick, and slate.
• Eco-Friendly Formula: VOC compliant and safer for the environment compared to solvent-based alternatives.
• Durable Performance: Increased resistance to scuffing, scratching, and heavy use.
• Simplified Cleanup: Applicators can be cleaned with water for added convenience.
• Improved Longevity: Cures over 10 days for a lasting protective finish.

Additional information

Glaze N Seal Wet Look II Sealer is backed by a limited manufacturer warranty when applied as directed. Testing a small, inconspicuous area is recommended before full application to ensure compatibility and satisfaction.

Q1: How many coats are needed for full protection?
A1: Most surfaces require 2–3 light coats. Heavily porous areas or high-traffic surfaces may benefit from additional coats.

Q2: Is this sealer safe to use indoors?
A2: Yes, it’s water-based and VOC compliant, making it safe for indoor use in well-ventilated areas.

Q3: Will this product change the color of the surface?
A3: No, it enhances the natural tones and provides a glossy “wet look” without altering the color permanently.

Q4: Can I use this sealer after acid washing a surface?
A4: Yes, but you must first neutralize the surface with Glaze N Seal Neutralizing Rinse to ensure proper adhesion.

Q5: How long should I wait before heavy use after sealing?
A5: Avoid heavy traffic or use for up to 72 hours to allow the sealer to cure properly.